BB06 Ballast Broom Colmar

Device for cleaning the track - Excess ballast removal. Available for all type of gauges.

Device for cleaning the track - Excess ballast removal Structure made of electro-welded steel plates - frame with four idle wheels. Available for all type of gauges. Rotor with n. 6 brush rows, made of hoses: Ø 50 mm. An hydraulic motor driven by an hydraulic pump of the loader. Adjustable height of the ballast broom: by hydraulic device actuated by the operator in the loader’s cab. Unloading conveyor belt, lateral right/left, also driven by the operator on the cab. Sprinkler system for dust removal - tank capacity 400 l.

Technical characteristics - Ballast broom BB06:

Rotor brushes: Ø 950 mm

Working speed: 800 m/h

Working width: 2.600 mm

Total width: 2.930 mm

Total length: 2.500 mm

Weight: 3.000 kg

To use the Ballast Broom the following technical characteristics are required:

For driving the broom:

• an hydraulic feeding line with flow= 110 l/min, and p= 250 bar

• a return line

• a drainage line

For driving the conveyor:

• Double acting line with flow= 30 l/min, and p= 180 bar

For lifting the broom, a third line is required with flow 20 l/min and p= 100 bar. A on-off switch in the cabin for actuation.